Before you step in advance to Canon printer set up, you want to establish a Wi-Fi connection for your printer, so follow any of the below using:
Wireless
LAN Setup:
·
Turn on your Canon printer to start the Wi-Fi LAN setup.
·
Then truly press the menu button and notice Network settings where
you want to tap on Wireless LAN settings and choose the SSID Settings option.
·
Select Access Point and select the favored network name.
·
Next, input the Wi-Fi safety key and wait for the related prompt.
·
Now down load canon ij setup from https://ij.start.canon and install on your pc.
WPS
Push Button:
Set up a
successful network connection for the Canon ij printer, press the Wi-Fi button
in your printer, and visit the access point once the orange alarm light becomes
steady. Within minutes, push the WPS button on your Wi-Fi router. If you can
see Connected Status, press OK to confirm.
Step by Step Guide to Set up
Your Canon Inkjet Printer
Use a Wi-Fi connection or USB connection to set up your printer.
Follow each single step mentioned here to set up Canon ij printer:-
·
Configure the
printer hardware: - Take out all of the canon printer factors from the container and
assemble them on an easy surface. Then configure and connect to power, as well
install Print head and Ink Cartridges.
·
Visit
ij.start.canon:- On your PC or Laptop net deal with bar, input ij.start.canon and Click
Set Up.
·
Enter Your
Canon Printer Model: - On ij start canon page, input or select your Canon printer
version and click on Go. For it, see your printer’s the front or pinnacle and
discover Canon version name.
·
Download
Canon Printer Drivers: - Select the best operating device like Windows or Mac and click
on Download in the front of the best Canon drivers tab.
·
Connect Ij
printer to a Wi-Fi connection: - Use Wireless LAN Setup or WPS Push Button method to connect
your printer with a network connection. You will require a Wi-Fi router as
well.
·
Start the
printer software installation: - Once you download the setup from https://ij.start.cannon for your pc or PC, double click on at the Canon ij setup file
[EXE or PKG] and receive the software license agreement.
·
Select a
connection kind to continue: - Tick on Wireless connection or USB connection to choose one and
comply with on-display instructions to move ahead.
·
Connect USB
if available: - This step for ij start canon isn’t mandatory, but when you have a
USB cable and the Wi-Fi connection method fails, in that case, choose a USB
connection during installation. Thereafter, plug one side of the USB cable to
the canon printer’s rear and any other aspect to the PC, Laptop port.
Instructions to Setting up
Canon IJ Printer with USB
Setting up Canon IJ printer with USB to your device calls for the
set up software (go to ij start canon or use CD) and a USB cable (purchase one
by one if not available with printer), then you may comply with the under
steps;
·
If you have already related the USB to the printer and PC,
eliminate it and soar to the next step.
·
Close all of the applications and open https://ij.start.canon
setp
portal to download the Canon printer drivers.
·
Now, find and run the setup record Msetup4.exe (or dmg file), then
click on YES.
·
Choose “Easy install,” click “Install,” and select the “Use the printer
via USB” option.
·
Hit NEXT and connect the USB cable to the PC and printer once
“Printer Connection” appears.
·
Turn on the Canon IJ printer and Install the Canon printer ink
cartridge to complete the setup.
Set up Canon IJ printer on Mac:
Start at ij.start canon
Make sure your Mac tool is as much as date. These instructions are
for Canon IJ Wi-Fi printer;
·
On your printer, tap domestic screen icon > Wi-Fi > LAN >
Wireless LAN > Easy Wi-Fi Connect > YES.
·
Use the https://ij.start.canon.com to download Canon printer driver for macOS.
·
Run the .dmg installer setup file from ij start canon and click on
Open.
·
Top Download, then hit NEXT, and input details.
·
Hit Install Helper, click on Start Setup, and receive the license
terms.
·
Select Wi-Fi router, enter key, and follow on-screen instructions
to complete the process.
Configure and set up the Canon
inkjet printer hardware
Once you are done with software set up using canon site, the other
step to start printing is printer hardware set up. Unless you don’t set up the
hardware, it’s difficult to start printing; therefore, follow steps to
configure the canon inkjet printer;
·
Make sure you have installed Canon ij setup from ij.start.canon
and set up correctly.
·
Now, the initial hardware screen will display you a few
instructions, for this reason soar to the next steps.
·
Choose the language, study the cartridge set up instructions, and
comply with them.
·
Open the feed slot cover, flow the paper guides and load 2 Paper
sheets your get in the rear tray.
·
Against the rims of the paper, slide the left and proper paper
guides.
·
Close ‘feed slot cover’ and open ‘output tray’ of paper.
·
Pull out the output tray extension, choose Execute, and select
Align Print Head.
·
Remove the paper after print and press the cancel button if the
orange light flashes.
·
Exit after the configuration completion.
Comments
Post a Comment